Category: Server

Motorcycle Retailer Structured Cabling

Motorcycle Retailer Structured Cabling

By |

The largest motorcycle retail store has undertaken a major upgrade of its network cabling system to significantly enhance operational efficiency and communication capabilities. This comprehensive project involved the installation of 583 nodes using two different cable management systems across two office buildings. In Project Phase 1, 386 nodes were installed with underfloor cable management, while in Project Phase 2, 197 nodes were installed with overhead cable management. The primary objective was to modernize the existing network infrastructure, ensuring robust performance, reliability, and scalability to meet both current and future business demands.

  • Structured Cabling
    We specialize in delivering comprehensive structured cabling solutions, expertly managing the supply and installation of 187 Voice Nodes, 190 Data Nodes, and 9 Wi-Fi Nodes through underfloor cable management, following the successful installation of 96 Voice Nodes, 97 Data Nodes, and 4 Wi-Fi Nodes using overhead cable management. Throughout the process, we ensure that each node is precisely connected, rigorously tested for optimal functionality, and clearly labeled and tagged, maintaining the highest standards of organization and efficiency within the data center environment.

Component Deliveries

We supply Panduit network cabling products, known for their reliability and performance in structured cabling solutions

  • Panduit
    Category 6 UTP Cable
    Category 6 Patch Cord
    Category 6 Information Outlet
    48-Ports Patch Panel
    24-Ports Patch Panel
    1RU Horizontal Cable Managers
    Dual Faceplate
  • Others
    Alpeth Copper Cable 50 Pair
    LSA-PLUS® Series 2 Disconnection Module
    Back Mount Frames
    Cross Connect Cable
    Blank Plate

Phase 1

Project Implementation

We pull network cables in underflooring and ensure efficient and organized installation throughout the infrastructure.

We label and tag network server switches for easy identification and efficient cable management.

Project Turn Over

We have successfully completed Phase 1 of the project. The new structured cabling system is fully prepared to support the existing workstations, with each cable meticulously tagged and organized within the data center. The newly built infrastructure is now ready to be patched with the upcoming network devices.

Phase 2

Project Implementation

In this phase of the project, the network cables are routed through the ceiling. We terminate, patch, and connect the cables to the existing network devices.

Project Turn Over

Similar to Phase 1, we ensure a streamlined and organized installation throughout the entire infrastructure. However, unlike the earlier phase, this phase includes the patching and connecting of cables to the network devices.

Overall, we have successfully completed the network cabling infrastructure upgrades, consisting of two phases, ensuring reliability and robust performance.

Commercial Real Estate Data Center Migration and Modernization with multiple Telcos Link Load Balancer

Commercial Real Estate Data Center Migration and Modernization with multiple Telcos Link Load Balancer

By |

One of the dominant players in the real estate industry, known for their world-class office designs in Bonifacio Global City, has successfully relocated its head office to another floor within the same building. This strategic move not only facilitated a fresh and efficient office layout but also incorporated advanced technological upgrades to support their growing operations.

The relocation involved more than just the physical office space, it included the careful transfer and setup of both computer workstations and a fully operational data center. The project required expertise in managing complex IT infrastructure, ensuring minimal disruption to daily operations and a seamless transition to the new location.

The services provided were comprehensive, covering the supply, installation, and configuration of new network cabling, along with both new and existing network switches, firewall security, and multiple Telco Link Load Balancers.

  • Structured Cabling
    We supply and install new cabling to support network infrastructure, ensuring compliance with industry standards and test all cables for connectivity and performance.
  • Server and Storage Relocation
    We carefully move servers and storage units to the new location. Reinstall and reconnect all equipment and ensuring proper configuration.
  • Network Equipment Transfer
    We safely disassemble and pack existing network devices. Install and configure network equipment at the new site.
  • Relocation of Workstations
    We create a list of all workstations and their configurations and reassemble at the new location.
  • Firewall Upgrade and High-Availability Configuration
    We supply, install and configure upgraded firewalls for high availability and ensuring minimal downtime.
  • Unified Threat Protection
    We deploy unified threat protection solutions to safeguard against cyber threats. Configure threat protection systems for optimal performance.
  • Site-to-Site VPN
    We establish secure VPN connections between multiple sites and ensure these are configured for high security and reliable performance.
  • Multiple Telco Link Load Balancing
    We set up and configure link load balancers to manage multiple ISP connections and distribute network traffic effectively and provide redundancy.
  • Access Point Modernization
    We install and configure modern access points to enhance wireless coverage and performance and for optimal connectivity.
  • Managed Switch High-Availability Configuration
    We install and configure managed switches with high-availability features and to ensure seamless network operation.
  • Voice and Data Termination
    We terminate voice and data cables according to specifications and test all terminations to ensure proper connectivity.
  • Wall Chipping and Restoration
    We identify areas requiring wall chipping for cable installation. Perform wall chipping, install necessary infrastructure, and restore walls to their original condition.

Site Survey and Inspection

We conduct a comprehensive audit of all equipment in the existing data center. We check the servers, storage devices, network switches, firewalls, access points, and other hardware.

We also visit and examine the relocation area in the new office to ensure a smooth transition and proper setup of the data center, network infrastructure, and workstations.

Component Deliveries

We supply enterprise-grade IT equipment.

  • Hewlett Packard Enterprise
    Aruba 2930F 24G PoE+ Switch
    Aruba AP-505 (RW) Unified Access Point
  • Fortinet
    FortiGate-60F
  • Panduit
    Category 6 UTP Cable
    Category 6 Information Outlet
    Single Faceplate

Project Implementation

We terminate voice and data network cables and ensure reliable communication and network performance within an organization.

We install a ceiling-mount Wi-Fi access point (AP) and ensure optimal wireless coverage and performance.

We install and configure network switches, firewalls, and set up multiple ISP link load balancing.

Project Turn Over

The project was successfully completed on time and within budget. The new structured cabling system, modernized data center, and enhanced network infrastructure have significantly improved the overall performance, reliability, and security of the office’s IT environment. Continuous monitoring and regular maintenance will ensure the longevity and efficiency of the implemented solutions.

Aviation PABX Telephone System with Structured Cabling

Aviation PABX Telephone System with Structured Cabling

By |

A domestic boutique airline based in Parañaque has entrusted our team with the important task of upgrading its telephone network system. This project underscores the airline’s commitment to enhancing its communication infrastructure, ensuring seamless connectivity for both internal operations and customer service.

Our team’s expertise in network solutions will be central to the success of this upgrade, which includes not only modernizing the telephone network system but also handling the standard installation of cables within their communication facilities. By implementing cutting-edge technology and reliable cabling solutions, we are setting the airline up for efficient and uninterrupted communication across all channels.

  • PABX Telephone System
    We supply, install and set up a PABX (Private Automatic Branch Exchange) telephone system and ensure all features and connections work correctly.
  • Structured Cabling
    We supply and install a structured cabling system to support the communication network and make sure all cables are properly connected and functioning.
  • Cisco Installation and Configuration
    We supply, install and configure Cisco networking equipment and conducted comprehensive testing to validate network connectivity, data transmission efficiency, and device interoperability between Cisco networking equipment and the PABX telephone system.
  • Voice and Data Termination
    We terminated voice and data cables at appropriate points to support PABX telephone system integration and conducted thorough testing to ensure reliable connectivity.

Component Deliveries

We supply enterprise-grade telephone and network infrastructure components.

  • Unify
    OpenStage 15 T Lava
    OpenStage Key Module 15 Lava
    OpenScape Business X5R System Box Rack-Mount Design
    OpenScape Business License
    Analog Subscriber Line Module 16-Ports for OpenScape Business X3R/X5R
    Analog Trunk Module
  • Gigaset
    DA310 Telephone
  • Cisco
    Catalyst 9300L 48-Ports Data Network
  • Phoenix
    Uninterruptable Power Supply
  • Panduit
    Category 5e UTP Cable
    Category 5e Patch Cord
    24-Ports Patch Panel
    Faceplate
  • Others
    Locally Fabricated Data Cabinet

Project Implementation

We install data cabinet, routing network cables through the ceiling, and ensuring proper cable management.

We terminated cables at both ends, connecting them to patch panels and network devices within the data cabinets. We conducted comprehensive testing to verify connectivity and performance, ensuring all cables were properly installed and functioning.

Project Turn Over

We successfully completed the installation of a PABX (Private Automatic Branch Exchange) telephone system integrated with structured cabling. All project objectives were met, significantly improving the communication infrastructure for our client.

Hardware Maintenance

Hardware Maintenance

By |

We also do IT Infrastructure Maintenance and Implementation Services such as Server, Storage, and Networking equipment.

DELL EMC Server Implementation and Maintenance.
TripleTech Project

TripleTech Project

By |

Infrastructure Modernization Project by RECHNER DATEN TECHNIK INC.

📠Structured Cabling Data & Voice
🚨Firewall & Security
📂AD Server + O365
💿Software Licensing
👁️‍🗨️Managed Services & Support

Server

Server

By | | Comments 0 Comment

In computing, a server is a computer program or a device that provides functionality for other programs or devices, called “clients”. This architecture is called the client–server model, and a single overall computation is distributed across multiple processes or devices. Servers can provide various functionalities, often called “services”, such as sharing data or resources among multiple clients, or performing computation for a client. A single server can serve multiple clients, and a single client can use multiple servers. A client process may run on the same device or may connect over a network to a server on a different device.